Datasheet — KNX Blinds Motor 220V AC
Manufacturer document, in English · 0.5 MB

ReferenceM/AG40B.1
KNX-controlled roller blind motor: up, down and percentage position, with scenes and safety functions.
The KNX Blinds Motor 220V AC controls roller blind travel up/down, and travel to a specified percentage position, by receiving a KNX signal.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Working current | 6 mA / 30 V DC |
| Communication | KNX |
| Rated input voltage | 220–240 V AC (50 Hz) |
| Rated input current | 0,9 A |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Motor torque | 3 N·m |
| Motor rotation speed | 22 rpm |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | φ35 × 528 mm |
|---|---|
| Net weight | 1224 g (motor) + 20 g (communication module) |
| Shell material | Steel (motor) + flame-retardant PC (communication module) |
| Installation | Wall hanging |
| Insulation rating | E |
| Work system | S2-3 min |
| Protection rating (EN 60529) | IP44 |
Manufacturer document, in English · 0.5 MB
A technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.