Datasheet — KNX Gateway
Manufacturer document, in English · 0.2 MB

ReferenceM/GWASC.1
Protocol conversion gateway that exchanges data between the KNX bus and devices of other protocols, with scenes, automation and backups.
The KNX Gateway is a protocol conversion gateway based on KNX bus communication, enabling data exchange with devices of different protocols.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Working current | 20 mA / 30 V DC |
| Auxiliary voltage | 20–30 V DC |
| Auxiliary current | 200 mA / 24 V DC |
| Communication | KNX, RS485, Ethernet |
| Functional interface | 1 KNX connector, 1 auxiliary power supply, 2 RS485 connectors, 1 RJ45 port, 1 SD card slot |
| Equipment | CPU H3 @ 1 GHz, 4G RAM, 8G Flash |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Operating system | Linux 3.2.0 kernel |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 90 × 36 × 63.7 mm |
|---|---|
| Net weight | 87 g |
| Shell material | PA66 |
| Installation | 35 mm DIN rail |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.2 MB

Small module for two-way data exchange between the KNX bus and RS485 equipment.
View product
Gateway that controls up to 64 DALI devices from KNX, with built-in DALI power supply and real-time failure detection.
View product
48-channel dry contact module to control lights, curtains and scenes from switches or contacts, or to drive LED indicators.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.