Datasheet — KNX USB Interface
Manufacturer document, in English · 0.2 MB

ReferenceM/USB.1
Interface linking a computer to the KNX bus to program, configure and diagnose devices with ETS.
The KNX USB Interface is a KNX system device with a USB interface that establishes bidirectional data transfer between the computer and the KNX bus. It supports operations such as KNX address management, application parameter management and KNX bus device diagnostics. The device is used in conjunction with ETS and standard KNX software.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Working current | 10 mA / 30 V DC |
| Communication | KNX |
| Interface | USB |
| Cable diameter of KNX terminal | 0.6–0.8 mm |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 90 × 36 × 70 mm |
|---|---|
| Net weight | 70 g |
| Shell material | PA66 |
| Installation | 35 mm DIN rail |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.2 MB

Small module for two-way data exchange between the KNX bus and RS485 equipment.
View product
Coupler that links and electrically isolates two KNX lines, filters telegrams to reduce traffic, or acts as a repeater.
View product
Router linking the IP network (LAN) to the KNX TP1 bus to exchange telegrams and program or monitor the installation with ETS.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.