Datasheet — Panel Power Interface with 4CH 10A Relay
Manufacturer document, in English · 0.6 MB

ReferenceMPFPIT- 0410-KT.17
Panel power base with four 10 A relays, fitted in an 86 wall box to control lighting, curtains and sockets.
The HDL KNX 4CH 10A relay base communicates and controls via the KNX protocol. When installed on the panel, it is placed in an 86 base box and serves as the power base for the panel. It can control the relay circuits of the base through the KNX bus, enabling intelligent control of household lighting, curtains, fans, sockets, and other electrical devices.
Design, cabling, ETS programming and hand-over: everything is included in our quote.
Our home-automation tradeValues provided by the manufacturer; the datasheet prevails.
| Working voltage | 21–30 V DC |
|---|---|
| Input voltage | 100–240 V AC (50/60 Hz) |
| Output channel | 4CH, 10 A/CH |
| Communication | KNX |
| Working temperature | -5 °C à 45 °C |
|---|---|
| Working relative humidity | ≤ 90 % |
| Storage temperature | -20 °C à 60 °C |
| Storage relative humidity | ≤ 93 % |
| Dimensions | 68.2 × 68.85 × 26.62 mm |
|---|---|
| Net weight | 77,5 g |
| Shell material | PC |
| Installation | Switch box installation |
| Protection rating (EN 60529) | IP20 |
Manufacturer document, in English · 0.6 MB

Power base for Inkslab smart panels with four 10 A relays to control lighting, curtains, fans and sockets.
View product
Power base for Inkslab smart panels with two 10 A relays to control lighting, curtains, fans and sockets.
View product
EU-format power base for Inkslab smart panels, with an auxiliary power supply input.
View product
EU-format power base that supplies Inkslab smart panels and connects them to the bus.
View productA technician visits you free of charge, checks compatibility with your installation and gives you a detailed quote within 24 hours.